WHIP in Baseball: What It Means, the Formula and How to Read It

Updated

Baserunner taking a lead off first base while the first baseman waits with his glove

WHIP is one of the simplest and most useful pitching stats. It stands for walks plus hits per inning pitched, and it tells you how many baserunners a pitcher allows in an average inning. The fewer runners a pitcher lets on base, the fewer chances the other team has to score.

This guide explains what WHIP means, shows the formula with an example, covers what counts and what does not, and explains how to read WHIP together with ERA.

What WHIP means

WHIP is a rate: the number of walks and hits a pitcher allows for each inning pitched. A WHIP of 1.00 means the pitcher allows, on average, one baserunner per inning through walks and hits. A WHIP of 1.50 means one and a half baserunners per inning.

Lower is better. A low WHIP is a sign that a pitcher is keeping the bases mostly empty, whether by striking batters out, throwing strikes, or getting weak contact that fielders turn into outs.

WHIP became popular because it is easy to understand, easy to calculate from a box score, and tells you something that wins and losses and ERA do not show.

The WHIP formula

WHIP = (walks + hits) ÷ innings pitched

You add the walks and hits allowed, then divide by the innings pitched.

Worked example

A pitcher has allowed 40 hits and 15 walks over 50 innings.

  1. Add hits and walks: 40 + 15 = 55
  2. Divide by innings: 55 ÷ 50 = 1.10

The pitcher has a WHIP of 1.10.

Handling partial innings

Baseball writes innings in thirds. 6.1 means six innings and one out, and 6.2 means six innings and two outs. Convert these before you divide:

  • 6.1 innings = 6.333
  • 6.2 innings = 6.667

If a pitcher allows 7 hits and 2 walks in 6.2 innings, the WHIP is 9 ÷ 6.667 = 1.35.

Treating 6.2 as the decimal 6.2 gives a slightly different result, so convert first. This is the same issue as in our guide to ERA in baseball.

What counts and what does not

WHIP counts hits and walks. It does not count every way a batter can reach base.

  • Counted: hits of every kind (singles, doubles, triples, home runs) and walks, including intentional walks in the usual calculation.
  • Not counted: batters hit by a pitch, batters who reach on an error and batters who reach on a fielder's choice or a dropped third strike.

So a pitcher who hits many batters, or whose defense makes many errors, may have a WHIP that looks a little better than the true number of baserunners. That is one reason some analysts treat WHIP as a good guide rather than a complete picture. Some sites also publish a version of the stat with hit batters included. Check how a given site defines it before you compare numbers.

How to read WHIP

Like ERA, WHIP depends on the league, the era and the level of play. The best way to judge a WHIP is to compare it with the league average for the same season. Some general ideas:

  • A WHIP well below the league average usually means a pitcher is limiting baserunners, either by missing bats or by avoiding walks.
  • A WHIP near the average is typical.
  • A WHIP well above the average means many runners on base, which usually leads to more runs unless the pitcher is lucky.

There is no official number that separates "good" from "bad." Treat any rule of thumb you read online as a rough guide, and be careful with comparisons between different leagues or decades.

WHIP and ERA together

WHIP and ERA answer different questions, and each helps check the other.

  • ERA counts earned runs. It tells you how many runs the pitcher gave up.
  • WHIP counts baserunners. It tells you how many chances the other team had to score.

When the two disagree, there is often a story. A pitcher with a low ERA and a high WHIP may have stranded many runners and could be due for a worse run. A pitcher with a high ERA and a low WHIP may have had some bad luck, such as a few home runs that came with runners on base, or defensive mistakes.

Because the number of runners is more stable than the number of runs scored, many fans and analysts use WHIP as a quick check on whether an ERA is realistic.

Limits of WHIP

  1. It treats every hit the same. A single and a home run both count as one, even though the home run does much more damage.
  2. It ignores hit batters and errors. As above, not every baserunner is counted.
  3. It depends on the defense. Balls in play that fall for hits count against the pitcher even if a better fielder might have caught them.
  4. It is noisy over short samples. Relievers who throw only a few innings can see their WHIP move a lot in one outing.
  5. It does not say how the runner scored. It tells you about traffic, not timing.

For these reasons, WHIP works best next to other stats such as ERA, strikeout rate and walk rate. For more terms you might meet on a stat sheet, see our baseball terms glossary.

WHIP in youth and amateur baseball

Many youth leagues and school teams record WHIP in their own stat books. The calculation is the same, but pitchers throw fewer innings, so the number swings more. If you keep score for a team, record hits, walks and outs for each pitcher. That way you can calculate WHIP at any time. Our baseball rules for beginners guide covers the basics of scoring a game.

Quick checklist

  1. Add the hits and walks the pitcher allowed.
  2. Convert the innings to a real number: .1 is one third, and .2 is two thirds.
  3. Divide the total by the innings pitched.
  4. Round to two decimals.
  5. Compare with the league average for the same season, not with a fixed target.

FAQ

What does WHIP mean in baseball?

WHIP means walks plus hits per inning pitched. It shows how many baserunners a pitcher allows in an average inning, and a lower number is better.

How do you calculate WHIP?

Add the walks and hits a pitcher has allowed, then divide by the innings pitched. For example, 40 hits and 15 walks in 50 innings gives 55 ÷ 50, which equals 1.10.

Does WHIP include hit batters?

The standard formula does not. It counts only hits and walks. Some sites show a version that adds hit batters, so check the definition.

What is a good WHIP?

It depends on the league and the season. Compare a pitcher's WHIP with the league average for the same year and level. A WHIP well below the average is strong.

What is the difference between ERA and WHIP?

ERA measures the earned runs a pitcher allows per nine innings. WHIP measures the baserunners a pitcher allows per inning through walks and hits. WHIP shows how often a pitcher lets runners on, and ERA shows how many of them score.

Related guides

Sources